Dynamic Striptease 500 ml – Degreasing Cleaner for Bike Chains

Dynamic Striptease 500 ml is a high-performance degreasing cleaner designed to thoroughly clean bicycle chains and prepare them for wax lubrication, including hot wax. Thanks to its powerful formula, it quickly dissolves stubborn grease, oil, dirt, factory grease, and old wax residue, leaving the chain perfectly clean and ready for re-lubrication.

It is the ideal product for those looking to switch from a traditional oil-based lubricant to wax lubrication, for preparing a new chain, or for anyone needing a deep cleaning of the drivetrain. Proper degreasing is essential to achieve the best performance from wax: even small amounts of grease or oil residue can compromise the adhesion and effectiveness of the lubrication, especially in the case of hot wax.

Dynamic Striptease acts quickly on contact with contaminants without requiring vigorous scrubbing. Its formula starts working in just a few seconds and allows a chain to be completely cleaned in just a few minutes, optimizing wax adhesion and preparing the drivetrain for effective, long-lasting lubrication.

The cleaner can be used on both new and used chains and has been tested for compatibility with Shimano, KMC, SRAM, and Campagnolo chains.

Features and benefits of Dynamic Striptease

• Preparation for waxing: optimizes the adhesion of lubricating wax, including hot wax.
• Deep degreasing: quickly dissolves stubborn grease, oil, dirt, and contaminants.
• Removal of factory grease: ideal for properly preparing a new chain before its first wax lubrication.
• Removal of wax residue: removes built-up old wax and prepares the chain for a new treatment.
• Fast action: starts working in just a few seconds and can completely clean a chain in just a few minutes.
• Cleaning without vigorous scrubbing: dissolves contaminants on contact, reducing the need for intensive mechanical scrubbing.
• Versatile use: suitable for both new and used chains.
• Tested compatibility: tested on Shimano, KMC, SRAM, and Campagnolo chains.
• Can be used with an ultrasonic cleaner: can also be used for an even deeper cleaning.

Directions for use

Dynamic Striptease can be applied in three different ways, depending on the cleaning requirements and available tools.

Before use: always shake the bottle thoroughly. Regardless of the method chosen, always rinse the chain with water after cleaning and let it dry completely before applying wax or a new lubricant.

Method 1 – Chain immersion

Ideal for a deep and thorough cleaning of the chain.

1. Pour Dynamic Striptease into a suitable container.
2. Completely immerse the chain in the product.
3. Shake the container with the chain and cleaner for 30 seconds.
4. Leave the product to work for 5 minutes.
5. Shake again for another 30 seconds.
6. Thoroughly rinse the chain with water and let it dry completely.

Method 2 – Direct application to the chain

A practical solution for cleaning the chain without removing it from the bike.

1. Apply Dynamic Striptease directly to the chain without removing it from the bike.
2. Work the product into the chain surface using a brush.
3. Leave to work for 5 minutes.
4. Thoroughly rinse with water and wait for it to dry completely.

Method 3 – Use with an ultrasonic cleaner

For an even deeper cleaning, Dynamic Striptease can be used with an ultrasonic cleaner.

• Recommended dilution: 1:3 ratio (Striptease:water).
• Pour the product and water into the cleaner, following the indicated dilution ratio.
• Proceed with cleaning the chain using the device.
• At the end, rinse with water and let the chain dry completely.

Dynamic Striptease: the first step to switching to hot wax

Hot wax lubrication is a solution appreciated by many cyclists for optimizing drivetrain cleaning and performance. However, to achieve optimal results, it is essential to start with a perfectly degreased chain.

Dynamic Striptease is designed specifically for this preparation phase: it completely removes factory grease, oil, dirt, and old wax residue, creating the ideal conditions for the adhesion of the new lubricating treatment.

Even a minimal amount of residual grease can negatively affect chain performance and hot wax effectiveness. For this reason, a thorough cleaning with Striptease is an essential step for anyone looking to convert their drivetrain from oil lubrication to waxing.

Why choose Dynamic Striptease?

If you are looking for an effective bike chain cleaner specifically designed to prepare it for wax lubrication, Dynamic Striptease is the ideal solution.

Its fast-acting formula allows grease, oil, and wax residue to be removed in just a few minutes, simplifying maintenance tasks and preparing the chain for re-lubrication. Thanks to its three application methods, it can be used for routine cleaning, preparing a new chain, or performing a deep treatment with an ultrasonic cleaner.

Product specifications

• Brand: Dynamic
• Model: Striptease
• Type: degreasing cleaner for bicycle chains
• Contents: 500 ml
• Action: dissolves and removes grease, oil, dirt, and wax residue
• Application: prepares the chain for wax lubrication, including hot wax
• Use: new and used chains
• Tested compatibility: Shimano, KMC, SRAM, and Campagnolo
• Application methods: immersion, direct application with a brush, or ultrasonic cleaner
• Action time: a few seconds to start dissolving contaminants; 5 minutes of dwell time for immersion and direct application methods
• Ultrasonic dilution: 1:3 (Striptease:water)
• Follow-up treatment: rinse with water and dry completely before re-lubrication