If you want to receive the bike of your dreams ready for use, remember to add the bike assembly (see link).
Bike assembly link: https://www.francesconibike.com/collections/montaggio-bici/products/montaggio-bici
Technical specifications
Chassis
-
Frameset: Magma 29 alu, 1.1/8" HT, BSA 68mm, seatpost diam. 27.2mm, HDM low pull or Side-Swing derailleur, PM 160mm, BOOST 9x141mm QR, internal cable routing, sizes 15-17-19-21"
-
Fork: Rock Shox Judy TK 29" 100mm with remote lockout, 1.1/8" steel HT, alloy crown, coil spring with preload adjustment, 30mm steel stanchions, magnesium end caps with PM 160mm disc mount, 9mm QR
-
Headset: Fsa TH888 forged steel cups ID diam.34mm, stack height 12.8+11=23.8mm, w/cap 15mm
Transmission
-
Controls: Deore SL-M5100-R 1x11, clamp band
-
Gearbox: FH-MT200-B for Center Lock, 32h 141mm OLD BOOST
-
Derailleur: Formula CL-1420 for Center Lock, 32f 100mm OLD, loose balls, 108mm axle length, w/QR
-
Crankset: Shimano FC-M5100-1, 32T, Crank length: 170mm-15", 175mm-17/21"
-
Bottom Bracket: included w/crankset
-
Chain: Kmc X11 EPT finish, 11v
Brakes
-
Brakes: Shimano BR-MT200, resin pads
-
Discs: Shimano SM-RT10, 160mm front & rear, Center Lock, resin pads only
Wheels
-
Wheels: 5, 622x25c, pivot, 32h, anodized, eyeletless, Presta valve hole
-
Rear hub: FH-MT200-B for Center Lock, 32h 141mm OLD BOOST
-
Front hub: Formula CL-1420 for Center Lock, 32f 100mm OLD, loose balls, 108mm axle length, w/QR
-
Tires: Kenda Booster 29x2.20, DTC compound, 30Tpi, rigid rim, ETRTO 56-622
Handlebar
-
Stem: Velomann Alloy 6061 3D forged, +/-7°, 1.1/8mm, diam. 31.8mm, length: 80mm-15/17", 90mm-19/21"
-
Handlebar: Velomann Flat top Alloy 6061-T6 double butted, width 720mm, diam. 31.8mm, 9° backsweep
-
Tape/Grips: T-one T-GP48B, one-piece, TPR material, 130mm
Saddle
-
Seatpost: Velomann AL2014 steerer w/alloy head, diam. 27.2mm, 0mm setback, length 350mm
-
Saddle: Velomann, steel rail, soft touch PVC covering, width 140mm
Specifications are subject to change without notice based on component availability.
