Specialized Levo 4 EVO Shock Extender

The Specialized Levo 4 EVO Shock Extender is an alloy kit designed to convert the standard Specialized Levo 4 into an EVO configuration, increasing the rear suspension travel from 150 mm to 170 mm. To complete the conversion, a new 230 x 62.5 mm rear shock must be installed and the fork travel adjusted to 180 mm to achieve an EVO-compliant configuration.

The kit is compatible with carbon and alloy Specialized Levo 4 frames in sizes S2 through S6.

Features and technical specifications

• Product: Specialized Levo 4 EVO shock extender
• Material: alloy
• Original rear travel: 150 mm
• Rear travel with EVO configuration: 170 mm
• Original shock: 210 x 55 mm
• Shock required for EVO configuration: 230 x 62.5 mm, not included
• Original fork travel: 160 mm
• Fork travel required for EVO configuration: 180 mm
• Frame compatibility: carbon and alloy
• Compatible sizes: S2, S3, S4, S5 and S6

Instructions for converting to an EVO configuration

To convert a standard Specialized Levo 4 into an EVO configuration, the following steps must be taken:

1. Replace the original 210 x 55 mm rear shock with a 230 x 62.5 mm shock, not included in the kit.
2. Adjust the fork to 180 mm travel: replace the original 160 mm fork air spring with a 180 mm air spring, not included, or replace the entire 160 mm fork with a fork having 180 mm travel, also not included.

Installation details and hardware

• Installing the EVO extender: for installation, reuse the bolt and mounting washer from the rear shock eyelet.
• Front shock eyelet: the kit does not include the M8 x 25 mm mounting hardware.
• Rear shock eyelet: the kit includes the spacer bushings for the rear shock eyelet, but does not include the 1/2" DU bushing.

Compatibility

The Specialized Levo 4 EVO shock extender is compatible exclusively with Specialized Levo 4 frames in sizes S2-S6, both carbon and alloy. Before purchasing, check the frame size and ensure you have the necessary additional components to complete the EVO conversion.

Note: the kit includes the alloy extender and the spacer bushings for the rear eyelet, but does not include the 230 x 62.5 mm shock, the 180 mm air spring or the 180 mm fork, nor the M8 x 25 mm front mounting hardware and the 1/2" DU bushing.