ENVE SES 6.7 PRO: le nuove ruote in carbonio aero per strada e triathlon

ENVE SES 6.7 PRO: the new carbon aero wheels for road and triathlon

ENVE SES 6.7 PRO: the new carbon aero wheels for road and triathlon

The ENVE SES 6.7 PRO is the new carbon wheelset developed by ENVE for road cycling and triathlon, with a clear goal: to deliver speed, aerodynamic efficiency, and stability without compromise.

The project stems from the experience gained with the previous SES 6.7 and ENVE's PRO philosophy, developed in collaboration with the world's top cycling athletes. The result is a completely redesigned wheel, engineered to be extremely fast and compliant with the latest UCI regulations.

A new aerodynamic profile

The new ENVE SES 6.7 PRO features a profile of 59 mm at the front and 65 mm at the rear, completely revised compared to the previous generation's 60/66 mm.

The redesign was also carried out following the introduction, on January 1, 2026, of the new UCI regulations on maximum rim depth.

The new profile was optimized for use with 28 mm tires and features an internal width of 22.5 mm.

ENVE developed the rim with particular attention not only to aerodynamics, but also to stability. The profiles were tested through wind tunnel, CFD analysis, and road testing, at both professional athletes' and amateur speeds.

Weight and technical specifications

Despite the depth of the rims, the declared weight of the wheelset is 1495 g ±3%, including tubeless tape and valves.

The main features are:

  • Weight: 1495 g ±3%

  • Front profile: 59 mm

  • Rear profile: 65 mm

  • Internal width: 22.5 mm

  • 24 holes

  • Brake: Centerlock

  • Tires: exclusively tubeless compatible

  • Recommended tire: 27 mm

  • Tubeless tape: 27 mm

  • Front valve: 80 mm

  • Rear valve: 85 mm

Each wheel weighs 690 g at the front and 805 g at the rear.

ENVE INNERDRIVE PRO hubs

One of the distinctive features of the SES 6.7 PRO is the new ENVE INNERDRIVE PRO hub, an evolution of the INNERDRIVE system already used by ENVE at the highest levels of cycling.

The hub uses an ultralight shell, a 40T PRO ratchet, a dedicated spring and the new ENVE PRO Ceramic Bearings.

Thanks to this evolution, the INNERDRIVE PRO system saves 60 grams compared to the INNERDRIVE Premium.

ENVE PRO Ceramic Bearings

The SES 6.7 PRO uses ENVE PRO Ceramic bearings, developed specifically for the INNERDRIVE system.

They feature Grade 5 ceramic balls, hardened stainless steel races and low-friction polyamide cages. The seals were designed to strike a balance between protection, rolling efficiency and reliability.

Designed for tubeless

The ENVE SES 6.7 PRO is exclusively compatible with tubeless-compatible tires.

The wheelset comes with 27 mm tubeless tape and valves measuring 80 mm at the front and 85 mm at the rear.

The configuration was developed around modern high-performance tires, with a profile optimized for 28 mm tires.

A wheel born for competition

The PRO designation identifies the ENVE range developed directly in collaboration with the best professional riders.

ENVE technologies have been featured in some of the most important international competitions, including Milan-San Remo, UAE Tour, Strade Bianche, Tour of Oman and Clásica Jaén, with over 10 World Tour victories.

The goal of the PRO line is to bring these technological solutions to cyclists who do not race professionally, offering products developed according to the same principles of pursuing maximum performance.

Made in USA

Like the brand's other premium wheels, the SES 6.7 PRO is made in Ogden, Utah, USA.

The ENVE facility handles several stages of the process in-house, from design to research and development, from testing to production, and finally assembly and support.

ENVE SES 6.7 PRO: uncompromising speed

ENVE SES 6.7 PRO is a solution designed for those seeking a high-performance road and triathlon wheelset capable of combining aerodynamics, lightness, stability and reliability.

The new 59/65 mm profile, 1495 g ±3% weight, tubeless compatibility, INNERDRIVE PRO hubs and ENVE PRO ceramic bearings make this wheelset one of the most advanced offerings in the ENVE range.

A wheel developed with a racing philosophy, but designed to be used by all cyclists who want to bring technology born at the highest levels of cycling to their own bike.

 

Discover them at this link: https://www.francesconibike.com/products/ruote-enve-ses-6-7-pro

Shop the story
 

My Wishlist

Loading your saved items

Don't lose your wishlist!

My Wishlist

Loading your saved items

Don't lose your wishlist!