All SpeedFun Furious Evo speed unlock devices can be activated and deactivated at any time, even without the need for connections to the light output.
Check the connectors before purchasing!
Before purchasing the SpeedFun tuning, check the color of the speed sensor connectors. Between 2022 and 2023, Polini created two new engines: E-P3+ "evo" and E-P3+ MX "evo". These new engines have connectors of different shapes and colors compared to the previous ones. To avoid mistakes, remember that:
White connectors = Polini E-P3, E-P3+, EP-3+ MX
Black connectors = E-P3+ "evo", E-P3+ MX "evo"
What is SpeedFun Furious Evo for Polini E-P3, E-P3+, EP-3+ MX
The function of the Furious Evo tuning device for Polini E-P3, E-P3+, EP-3+ MX is to electronically manipulate the rear wheel rotation speed and to communicate to the motor a speed always lower than 25 KmH in order to achieve a very high actual speed with the motor active. The maximum speed limit will therefore be dictated by the power of the motor added to the power expressed by one's own legs.
When the tuning device is active, without communication with the display, it will show halved data on the display starting from a certain threshold.
SpeedFun Furious Evo can be activated and deactivated at will and retains the setting even after the e-bike is turned off. It can be installed on e-bikes with Polini E-P3, E-P3+, EP-3+ MX motors, mostly mounted on e-bikes from Avio Bike, Bad Bike, Bianchi, Bikel, Cicli Elios, CIOCC, Fabrik, FM Bike, Garelli, Handbike Garage, Jeep, Kawasaki, MDE Bikes, Mondial, Officine Mattio, Olmo, Pedroni Cycles, Stajvelo, Titici, WR Compositi, Guerciotti (Brera) and many others regardless of the type of display or side control of the e-bike.
The Furiosu Evo tuning device for Polini can be activated/deactivated with a simple press of the ebike's light button. If the ebike already has the headlights connected to the light output, or if it cannot be used, it will still be possible to activate/deactivate the tuning with a very practical system (for more information, please refer to the instructions here). The device is provided plug and go ready to use and is installed very easily thanks to the original connectors, with which no physical modification of the ebike is necessary.
Ebike with Polini motor where the Furious Evo device has been successfully installed.
(this list is illustrative and not exhaustive)
– Guerciotti Brera I.ON
– Bad Bike evo Polini
– Bianchi Impulso e-Road
– Bike Urban+
– Ciocc XC-Hero 27.5
– Pedroni E-Pard Team Replica
– Elm E-bro
Additional Information
- Installation: Internal (completely invisible from the outside)
- Dimensions: 31 x 16.5 x 7.5 mm
- Connections: Equipped with original and/or compatible connectors (does not require any physical modification to the e-bike wiring)
- Assistance: Over 60 km/h
- Compatible engines: Polini E-P3, E-P3+, EP-3+ MX
- Display compatibility: Any display and handlebar control
- Displayed data (on display or app): Altered (halved above a certain threshold)
- Power Supply: No need for external power supply
ATTENTION - IMPORTANT NOTICE
Once the SpeedFun speed unlock device is installed, the electric bicycle, exceeding the limit of 25 km/h, is equated to a moped and as such, if it circulates in public places, it requires homologation-registration by the Civil Motorization, is subject to the payment of the circulation tax and insurance coverage, must have a license plate, cannot circulate on bike paths, and the driver is required to have a driving license and must wear a helmet. Furthermore, riding a motorized bicycle equated to a moped that does not comply with the aforementioned provisions results in the administrative seizure of the vehicle and monetary penalties that vary depending on the violation committed. The manufacturer of the speed unlock system disclaims any responsibility for any damage caused to the pedal-assisted bicycles on which the device is installed as well as for direct or indirect damage to persons or property.
SpeedFun – Phase B snc disclaims any responsibility for any anomalies caused by the anti-tuning defenses that engine manufacturers may activate.
Please note that modifying the bicycle may void the manufacturer's warranty.
SOFTWARE COMPATIBLE WITH SPEEDFUN DEVICES
The operation of SpeedFun devices is guaranteed for the software versions of the e-bikes released up to the date of purchase of the device itself.
If the e-bike is subsequently updated with software for which the SpeedFun device was not designed, it may not function properly.
Before updating your engine, it is necessary to check compatibility with your SpeedFun device.
