All SpeedFun Furious Evo speed release devices can be activated and deactivated at any time even without the need for connections to the light output.
Check the connectors before buying!
Before purchasing SpeedFun tuning, check the color of the speed sensor connectors. Between 2022 and 2023 Polini created two new engines: E-P3+ “evo” and E-P3+ MX “evo”. These new motors have connectors of a different shape and color compared to the previous ones. To avoid making mistakes, remember that:
White connectors = Polini E-P3, E-P3+, EP-3+ MX
Black connectors = E-P3+ “evo”, E-P3+ MX “evo”
What is SpeedFun Furious Evo for Polini E-P3, E-P3+, EP-3+ MX
The function of the Furious Evo tuning device for Polini E-P3, E-P3+, EP-3+ MX is to electronically manipulate the rotation speed of the rear wheel and to communicate to the engine a speed always lower than 25 KmH in order to obtain a very high real speed with active motor. The maximum speed limit will therefore be dictated by the engine power added to the power expressed by your legs.
When the tuning device is active, not having communication with the display, it will show the halved data on the display starting from a certain threshold.
SpeedFun Furious Evo can be activated and deactivated as desired and maintains the setting even after the ebike is turned off. It can be installed on ebikes with Polini E-P3, E-P3+, EP-3+ MX engines mounted mostly on Avio Bike, Bad Bike, Bianchi, Bikel, Cicli Elios, CIOCC, Fabrik, FM Bike, Garelli, Handbike Garage, Jeep, Kawasaki, MDE Bikes, Mondial, Officine Mattio, Olmo, Pedroni Cycles, Stajvelo, Titici, WR Compositi, Guerciotti (Brera) and many others regardless of the type of display or lateral control of the ebike.
The Furiosu Evo tuning device for Polini can be activated/deactivated by simply pressing the ebike light button. If the ebike already has lights connected to the light output, or if it is not possible to use it, it will still be possible to activate/deactivate tuning with a very practical system (for more information see the instructions here). The device is supplied plug and go ready to use and can be installed very simply thanks to the original connectors with which no physical modification of the ebike is necessary.
Ebike with Polini engine where the Furious Evo device has been successfully installed
(this list is illustrative and not exhaustive)
– Guerciotti Brera I.ON
– Bad Bike evo Polini
– Bianchi Impulso e-Road
– Bikel Urban+
– Ciocc XC-Hero 27.5
– Pedroni E-Pard Team Replica
– Olmo E-bro
Additional Information
- Installation: Internal (totally invisible from the outside)
- Dimensions: 31 x 16.5 x 7.5 mm
- Connections: Equipped with original and/or compatible connectors (does not require any physical modification to the ebike wiring)
- Assistance: Over 60 km/h
- Compatible engines: Polini E-P3, E-P3+, EP-3+ MX
- Compatible displays: Any display and handlebar control
- Data displayed (on display or app): Altered (halved above a certain threshold)
- Power supply: No need for external power supply
Attention - Important notice
Once the SpeedFun speed release device has been installed, the electric bicycle, exceeding the 25 kmH limit, is equated to a moped and as such, if it circulates in public places, it requires approval-registration by the Civil Motorization Authority, it is subject to the payment of road tax and insurance coverage, it must have a license plate, it cannot circulate on cycle paths and the driver is obliged to drive with a license and must use a helmet. Furthermore, driving a motorized bicycle equivalent to a moped that does not comply with the aforementioned provisions entails the administrative seizure of the vehicle and financial penalties that vary depending on the infringement committed. The manufacturer of the speed release system declines any responsibility relating to any damage caused to the pedal-assisted bicycles on which the device is mounted as well as direct or indirect damage to people or things.
SpeedFun – Phase B snc declines all responsibility for any anomalies caused by anti-tuning defenses that engine manufacturers may activate.
Please remember that modifications to the bicycle could invalidate the manufacturer's warranty.
SOFTWARE COMPATIBLE WITH SPEEDFUN DEVICES
The operation of the SpeedFun devices is guaranteed for the software versions of the ebikes released up to the date of purchase of the device itself.
If the ebike is subsequently updated with software for which the SpeedFun device was not designed, the device may not function.
Before updating your engine you need to check compatibility with your SpeedFun device.
