The ENVE SES 6.7 PRO is the new carbon wheelset developed by ENVE for road cycling and triathlon, with one precise goal: to offer speed, aerodynamic efficiency, and stability without compromise.
The project stems from the experience gained with the previous SES 6.7 and ENVE's PRO philosophy, developed in collaboration with top international professional cyclists. The result is a completely redesigned wheel, conceived to be extremely fast and compliant with the latest UCI regulations.
A new aerodynamic profile
The new ENVE SES 6.7 PRO features a profile of 59 mm in the front and 65 mm in the rear, completely revised compared to the previous 60/66 mm generation.
The redesign was also carried out following the introduction of the new UCI regulations on maximum rim depth, effective as of January 1st, 2026.
The new profile is optimized for use with 28 mm tires and features an internal width of 22.5 mm.
ENVE developed the rim with a focus not only on aerodynamics but also on stability. The profiles were tested in the wind tunnel, through CFD analysis, and via road testing, both at speeds achieved by professional athletes and those of amateur riders.
Weight and technical features
Despite the rim depth, the stated weight of the wheelset is 1495 g ±3%, including tubeless tape and valves.
The main features are:
-
Weight: 1495 g ±3%
-
Front profile: 59 mm
-
Rear profile: 65 mm
-
Internal width: 22.5 mm
-
24 holes
-
Brake: Centerlock
-
Tires: tubeless compatible only
-
Recommended tire: 27 mm
-
Tubeless tape: 27 mm
-
Front valve: 80 mm
-
Rear valve: 85 mm
The weight of the individual wheels is 690 g for the front and 805 g for the rear.
ENVE INNERDRIVE PRO Hubs
One of the distinctive features of the SES 6.7 PRO is the new ENVE INNERDRIVE PRO hub, an evolution of the INNERDRIVE system already used by ENVE at the highest levels of cycling.
The hub uses an ultralight shell, a 40T PRO ratchet, a dedicated spring, and new ENVE PRO Ceramic Bearings.
Thanks to this evolution, the INNERDRIVE PRO system saves 60 grams compared to the INNERDRIVE Premium.
The ratchet has also been redesigned to reduce material and decrease friction, while the new spring is designed to ensure reliable engagement using the minimum force necessary.
ENVE PRO Ceramic Bearings
The SES 6.7 PRO use ENVE PRO ceramic bearings, developed specifically for the INNERDRIVE system.
They are equipped with Grade 5 ceramic balls, hardened stainless steel races, and low-friction polyamide cages. The seals have been designed to strike a balance between protection, rolling efficiency, and reliability.
The ENVE PRO Ceramic bearings are covered by a 5-year warranty.
Designed for tubeless
The ENVE SES 6.7 PRO are exclusively compatible with tubeless compatible tires.
The wheelset comes with 27 mm tubeless tape and 80 mm front and 85 mm rear valves.
The configuration was developed around modern high-performance tires, with a profile optimized for 28 mm tires.
A wheel born for competition
The PRO designation identifies the ENVE range developed directly in collaboration with top professional riders.
ENVE technologies have been at the forefront of some of the most important international competitions, including Milan-San Remo, UAE Tour, Strade Bianche, Tour of Oman, and Clásica Jaén, with over 10 World Tour victories.
The goal of the PRO line is to bring these technological solutions to cyclists who do not race professionally as well, offering products developed according to the same performance-maximizing research principles.
Made in USA
Like the brand's other premium wheels, the SES 6.7 PRO are produced in Ogden, Utah, USA.
At the ENVE facility, various stages of the process are managed in-house, from design to research and development, testing to manufacturing, through to assembly and support.
ENVE SES 6.7 PRO: uncompromising speed
The ENVE SES 6.7 PRO represent a solution designed for those seeking a high-performance road and triathlon wheelset, capable of combining aerodynamics, lightness, stability, and reliability.
The new 59/65 mm profile, the weight of 1495 g ±3%, tubeless compatibility, INNERDRIVE PRO hubs, and ENVE PRO ceramic bearings make this wheelset one of the most advanced offerings in the ENVE range.
A wheel developed with a racing philosophy, but designed to be used by all cyclists who want to bring technology born at the highest levels of cycling to their own bicycle.
Discover them at this link: https://www.francesconibike.com/products/ruote-enve-ses-6-7-pro
